Zone Lists - Honeywell Lynx Plus Programming Manual

✻ ✻ ✻ ✻ 81 ZONE LISTS
Use this mode to define zone lists for Powerline Carrier Devices and/or for the chime by zone feature. Press
while in programming mode.
Note: Entering a number other than the one specified may give unpredictable results.
81 81 81 81

ZONE LISTS

ZONE LISTS MENU MENU
ZONE ZONE LISTS LISTS MENU MENU
A01 A01
A01 A01
ZONE ZONE ZONE ZONE LIST LIST LIST LIST NUMBER NUMBER NUMBER NUMBER
b
ZN ZN ZN ZN ENTRY ENTRY ENTRY TO TO TO TO LIST ENTRY LIST LIST LIST
C C C C
DEL DEL WHOLE DEL DEL WHOLE ZN ZN ZN ZN LST WHOLE WHOLE LST LST LST
d
DEL DEL DEL DEL 1 1 1 1 ZN ZN ZN ZN FRM FRM FRM LST FRM LST LST LST
E E E E
DELETE DELETE DELETE DELETE ZONES ZONES ZONES ZONES
Zone List Programming
0 = Exit mode, upon which this prompt blinks.
1 = Enter mode
Zone List Number
2-digit zone list number to be programmed (use zone list 03 for chime by zone feature).
00 = No zone list, exit zone list mode
01, 02 or 03 = Zone List Number
[✻] = Accept zone number and enter the next zone number
Zone Entry To List
Enter the 2-digit zone number to be added to this zone list. The system will announce the
Voice Descriptor for the selected zone, if it is programmed.
[ ] = Accept zone number and enter the next zone number
✻
00 = Accept zone number and continue to next prompt
Delete Entire Zone List
0 = Don't delete; continue to next prompt
1 = Delete the current zone list
Delete Zones From List?
0 = Don't delete; continue to next zone list number (prompt A)
1 = Continue to delete zones prompt
Delete Zones
Enter the 2-digit zone number to be deleted from the current zone list. When deleting a
zone(s) from the zone list, if the selected zone has a Voice Descriptor programmed, upon
deletion it will be announced as a confirmation that it has been deleted.
[✻] = Delete zone and enter next zone to be deleted
00 = Return to next zone list number (prompt A 01)
- 16 -
81
✻