Honeywell Lynx Plus Programming Manual page 5

Data Field Display
41 41 41 41
PRIMARY PRIMARY PRIMARY TEL PRIMARY TEL NUM TEL TEL NUM NUM NUM
42 42 42 42
SECOND TEL SECOND TEL NUM NUM
SECOND SECOND TEL TEL NUM NUM
All four digits of the subscriber account number must be entered in Fields

✻ ✻ ✻ ✻
in 48 (option 5), all ten digits of the Subscriber Account number must be entered.
In fields ✻43, ✻44, enter 4 to 10 digits. Enter 0–9; #+11 for B; #+12 for C; #+13 for D; #+14 for E; [#+15 for F].
Enter ✻ as 4th digit, if 3+1 dialer reporting is to be used. If only 3 digits used, pressing ✻ advances to the next
field. Enter [✻] as the fifth digit if a 4-digit account number (for 4+1, 4+2, CID®) is used. To clear entries from
field, press ✻43✻ or ✻44✻.
Examples:
For Acct. 1234, enter: 1 | 2 | 3 | 4
For Acct. 1234567890, enter: 1| 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0
43 43 43 43
#
PRIMARY PRIMARY PRIMARY PRIMARY ACCOUNT ACCOUNT ACCOUNT ACCOUNT
44 44 44 44
#
SECNDRY SECNDRY SECNDRY SECNDRY ACCOU ACCOU ACCOU ACCOUNT NT NT NT
46 46 46 46
#
FOLLOW ME ME ME ME PHONE FOLLOW PHONE
FOLLOW FOLLOW PHONE PHONE
47 47 47 47
PHONE PHONE SYS SYS SELECT SELECT
PHONE PHONE SYS SYS SELECT SELECT
48 48 48 48
REP FRMT REP REP REP FRMT PRI/SEC FRMT FRMT PRI/SEC PRI/SEC PRI/SEC
† Entering a number other than the one specified may give unpredictable results.
Function& Programming Options
Primary Phone Number
Enter up to 20 digits; Do not fill unused spaces. If fewer than 20 digits entered, pressing
✻advances to the next field. To clear entries from field, press ✻41✻.
Secondary Phone Number
Enter up to 24 digits; Do not fill unused spaces. If fewer than 24 digits entered, pressing
✻advances to the next field. To clear entries from field, press ✻42✻.
; For Acct. B234, enter: #+11| 2 | 3 | 4
Primary Subscriber Account Number
Secondary Subscriber Account Number
"Follow Me" Reminder Phone Number
Enter up to 24 digits; Do not fill unused spaces. If fewer than 24 digits entered, pressing ✻
advances to the next field. To clear entries from field, press ✻46✻.
Enter 0-9, #+11 for '✻'; #+12 for '#'; #+13 for a pause (two seconds).
Phone System Select
† [5]
Central
Station Pulse
No WATS 0 = No Speaker
Phone
WATS 2 = No Speaker
Phone
Report Format for Primary/Secondary
[7, 7]
Primary Secondary
0 = 3+1, 4+1 ADEMCO L/S STANDARD
1 = 3+1, 4+1 RADIONICS STANDARD
2 = 4+2 ADEMCO L/S STANDARD
3 = 4+2 RADIONICS STANDARD
5 = ADEMCO CONTACT ID® REPORTING
WITH 10-DIGIT SUBS ACCT NO.
[ ] = Programmed Table 1 Default Values
✻ ✻ ✻ ✻
43 and
; For Acct. 123, enter:
See note above.
See note above.
Note: If you are using Pulse (rotary) Dialing, you must enter the
numbers slowly to allow the pulse dialer time to operate.
Dialing Mode
Tone Pulse
1 = No 4 = With
Speaker Phone Speaker
Phone
3 = No 6 = With
Speaker Phone Speaker Phone
Note: Option 5 or 7 (ADEMCO Contact ID®)
6 or undefined = 4+2 ADEMCO EXPRESS
7 = ADEMCO CONTACT ID® REPORTING
WITH 4-DIGIT SUBS ACCT NO.
8 = 3+1, 4+1 ADEMCO L/S EXPANDED
9 = 3+1, 4+1 RADIONICS EXPANDED
- 5 -
✻ ✻ ✻ ✻
44. If ten digit format is selected
1 | 2 | 3 | ✻
Tone
5 = With
Speaker Phone
7 = With
Speaker Phone
must be selected for AAV.