Foscam FI981W User Manual page 65

There are four alarm indicators:
A Ring
There is an embedded speaker inside the camera, so if you select Ring, when the motion has been detected, the people
around the camera will hear beep alarm sound.
B Send E-mail
If you want to receive alarm emails when motion is detected, you must select Send E-mail and set Mail Settings first.
The alarm email cannot contain the alarm picture if you have not selected Take Snapshot.
C Take Snapshot
If you select this checkbox, when the motion has been detected, the camera will snap the live view window as a still
picture and load it to the FTP. Make sure you have set FTP and set FTP as the storage path in Video->Snapshot settings
panel.
If you select Send Email, at the same time the picture will be send to you as an attachment.
Capture interval: The interval time between two pictures.
D Record
If you select this checkbox, when the motion has been detected, the camera will record automatically and store the record
files to the SD Card. Make sure the camera has inserted SD card and you have set the SD card as the Alarm record files
storage path, please go to Record—> Storage location page to verify this settings.
The default alarm record time is 30s and pre-alarm record time is 5s, please go to Record—> Alarm Record page and
change the alarm time settings.
Step 05: Set detect area
Click set detect area and it pop up a window, then you can draw the detection area. Click Back button after settings.
When something moving in the detection area, the camera will alarm.
Shenzhen Shenzhen Foscam Foscam Intelligent Intelligent
Tel: Tel: 86 86 755 755 2674 2674 5668 5668 Fax: Fax:
Technology Technology Co., Co., Limited Limited
86 86 755 755 2674 2674 5168 5168
www .foscam.com
www .foscam.com
62