Foscam FI981W User Manual page 25

How to do preset position?
Firstly, move the camera and stop at a desired place where you want make preset position.
Secondly, click
special characters. Then click OK to save it. If you want to reset the preset position, click Cancel.
After that, you can move the camera and stop at another place, and set another preset position. You can do all the 16
preset positions with this method.
If you want to see one preset position you have set, only select the preset position name from the preset dropdown list,
and click go button, the camera will go to the preset position.
Section 7 IR LED Lights
Click Infra led and there are two modes to adjust the infrared led: Auto and Manual.
Auto: Select it and the camera will adjust the infra led (on or off) automatically.
Manual: Select it and you can turn on or turn off the infra led manually.
Section 8 Image quality settings
In this page, you can tune Hue, Brightness, Contrast, Saturation, and Sharpness to get higher quality.
Section 9 OSD
If you have added time and camera name in the video, you can see it in the live window.
Go to Settings ---Basic settings---Camera name panel, and you can change another device name. The default device
name is anonymous.
Go to Settings ---Basic settings---Camera time panel and adjust the device time.
Go to Settings ---Video---On Screen Display panel, you can add or no add OSD.
Shenzhen Shenzhen Foscam Foscam Intelligent Intelligent
Tel: Tel: 86 86 755 755 2674 2674 5668 5668 Fax: Fax:
button and enter a descriptive name for the preset position. The preset position cannot contain
Technology Technology Co., Co.,
86 86 755 755 2674 2674 5168 5168
Limited Limited
www .foscam.com
www .foscam.com
22