Foscam FI981W User Manual page 47

4.3.5 UPnP
The default UPnP status is closed. You can enable UPnP, then the camera's software will be configured for port
forwarding. Back to the "Device Status" panel, you can see the UPnP status:
The camera's software will be configured for port forwarding. There may be issues with your routers security settings,
and sometimes may error. We recommend you configure port forwarding manually on your router .
4.3.6 Port
This camera supports HTTP Port. HTTP Port is used to access the camera remotely. If you want to access the camera and
view the video, the HTTP Port must both be configured correctly.
HTTP port: By default, the HTTP is set to 88. Also, they can be assigned with another port number between 1 and
65535. But make sure they can not be conflict with other existing ports like 25, 21.
Note: FI9818W and FI9821W support ONVIF Port.
Another way to change the HTTP port no.
Shenzhen Shenzhen Foscam Foscam Intelligent Intelligent
Tel: Tel: 86 86 755 755 2674 2674 5668 5668 Fax: Fax:
Technology Technology Co., Co., Limited Limited
86 86 755 755 2674 2674 5168 5168
Figure 4.31
Figure 4.32
Figure 4.33
www .foscam.com
www .foscam.com
44