Battery Installation - Vetta V80 Owner's Manual

Cycle computer
Table of Contents

Advertisement

BATTERY INSTALLATION

The V-80 and V-80C computers use a common LR44 1.5v button cell battery.
Replacement batteries are available at most camera shops and from your Vetta
retailer. Under normal usage a battery should last approximately one year. NOTE:
Most problems that occur with cycle computers are caused by dead or weak bat-
teries. If you are having problems with your computer's operation, check and
replace the battery first.
STEP 1
Remove the battery cover from the bottom of the computer by turning the
battery cap counterclockwise with a coin.
STEP 2
Install the battery into the battery compartment with the positive (+) side of the
battery facing the compartment door. Be careful when you are installing the
battery not to bend any of the battery contacts.
LR44 1.5v Battery
STEP 3
Screw the battery cap firmly into place. Make sure that the rubber o-ring seal
does not get pinched or distorted in this operation as this may compromise the
waterproofing of the unit.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

V80c

Table of Contents