Network Parameters - HIKVISION DS-8104HMI-A User Manual

All Day, Rec. Type: If you need to record 24 hours, you can enable "All Day" option and

select a record type.
Period: If you do not need record all day or you need to record different types in different

period, there are 4 time periods for one day, and each time period can select start time,
stop time and different record type.
Copy to, Copy: The setup schedule can be copied to other days.

Note:
1. If record type is "Motion Detect", you must setup "Motion Detection" in order to trigger
motion recording.(Refer to section 5.3.2)
2. If record type is "Alarm" , you must setup "Alarms" in order to trigger alarm
recording.(Refer to section 5.13)
3. The time period is among 00:00-24:00.

5.5 Network Parameters

If you want use network to access DVR, you must setup network parameters.
Note: If any network parameter is modified, you must save and reboot DVR to make it into
effective.
The parameters can be setup in "Network" menu. (Fig.5.20)
*NIC type: Default is "10M/100M Auto", the order options are: 10M Half-Dup, 10M

Full-Dup, 100M Half-Dup and 100M Full-Dup.
*IP: This IP address must not be conflict with other IP. If there is DHCP server in network,

you can set IP as "0.0.0.0", save and reboot DVR. In reboot process, DVR will search the
DHCP server and get one dynamic IP address. If DVR uses PPPoE function, also DVR can
dialup into internet and this item will display the dynamic internet IP address.
*Port: Network access port number, must be from 2000 to 65535, the default port is

8000.
* Mask: This is sub net mask.

User Manual of DS-8104HMI-A(/XX) Series Mobile Net DVR (V1.20.00)
44
Fig.5.19
Fig.5.20