Key Ignition Switch Connection - HIKVISION DS-8104HMI-A User Manual

1. Use the "L" screwdriver in
accessories box to twist-off the
screws on the cover of SIM/SD
card.
4. Extract the board, and put
the card on the board.

2.5 KEY Ignition Switch Connection

Note:
1. The basic two power on conditions for mobile DVR:
User Manual of DS-8104HMI-A(/XX) Series Mobile Net DVR (V1.20.00)
2. Then you will see the SIM/
UIM socket (Indicated by red
frame) and SD/ SDHC socket
(Indicated by blue frame).
5. Insert the board to the slot.
13
3. Press the yellow bar on the right of
SIM/UIM slot (as shown on the left
figure) to pop up the card (as shown
on the right figure).
6. Reinstall the cover of SIM/SD slot,
and connect the 2 antenna.