HIKVISION DS-8104HMI-A User Manual page 12

Declaration: Recording time may be not so precise, it is just for reference, and we will not take the responsibility for this.
HDD installation steps:
1. Please prepare all the tools
and materials: 2.5 inch SATA HD,
anti-static gloves, HDD-Lock key,
cross screwdriver, HD screws
5. Please wear antistatic gloves.
Carefully put in the first HD on
the bracket (PCB face down), aim
at the HD interface and insert it
tightly.
User Manual of DS-8104HMI-A(/XX) Series Mobile Net DVR (V1.20.00)
2. Firstly, open the HD-Lock with
the key, and loosen the screw
alone the anti-clockwise. Then
pull out the HD box with uniform
force.
5. When insert the whole HDD,
please gently push it into the
under position.
11
3. The HDD bracket is fixed with
wire rope. Each side has a gap for
HDD installation.
6. Put in the second HDD on the
bracket (PCB face up), aim at the
HDD interface and insert it.