Hdd Backup; Backup File Playback - HIKVISION DS-8104HMI-A User Manual

User Manual of DS-8104HMI-A(/XX) Series Mobile Net DVR (V1.20.00)
2. Backup all the files in a certain period of time.
After entering the playback interface, move "Active Frame" to "Backup Setup" button, press [ENTER]
key to enter the backup menu (Fig.4.10).Firstly, select the "Save Device" and "Camera" ("√"means the
camera is selected, press [EDIT] to switch "×"and"√" ). Secondly, select "Rec. Type" and set "Date"
and "Period". Finally, move the "Active Frame" to "Start Backup", and press [ENTER]to start backup.
If there is no file in the selected period, after pressing [ENTER] will back to playback interface.
Note:
1. The backup disk should be FAT32, if not, please format it first. Format method is: after choosing
the "Save Device ", the "Active Frame" will on "Format", press [EDIT] to start formatting;
2. If "Device Error" dialog (Fig.4.11) pop-up, please check the device connection.

4.7.2 HDD Backup

Fig.4.10 Backup the files in a certain period
User can directly push out the HDD bracket, insert it into DS-1004HMI Mobile DVR backup device and
use MVA (Mobile Video Analysis) software to playback and download recorded files. The details please refer to the user manual of MVA.

4.7.3 Backup File Playback

Backup files naming rule:
Backup files will be saved in the file named with the DVR name. (Please refer 5.1.3 for the DVR name details.) The files can be searched by their names, for example,
in a folder named "CABX 5523" there is a file with name "ch01-200808071029.mp4", that means this file is the record video of DVR named "CABX 5523" channel 1,
the beginning time is 10:29 on 2008/8/7.
1. Playback multi-channel backup files.
MVA software can be used to playback multi-channel backup files. If DVR has GPS function, the recording file can be playback with the position displayed on the
map. The details please refer to the MVA user manual.
30