HIKVISION DS-8104HMI-A User Manual page 29

Playback operations:
In the playback interface, you can set search channels, record type, time section, and select "Search" button. DVR will search and list the matched files. (Fig.4.6) If
the matched files are more than8, you can use "Page No." to select page. In the file list box, use [ ], [ ] keys to move the scroll bar to the file, press [ENTER] key
to playback the file.
If directly press "Play" button, after setting the channel, record type and time section, DVR will start to playback based on time section.
If DVR cannot find the matched files, then a failure dialog will pop-up, as shown in Fig.4.7.
At the bottom of image, there is an information bar with the Volume, Play Process, Play Speed, Played Time
and File Total Time. (Fig.4.8)
Playback control keys description:
Display/ Hide information bar:[MENU];

Open/Close sound:[PLAY],under the mute mode,"×"will appear on the bar;

 Adjust play progress: [ ] (Backward), [ ](Forward). The unit is"%";
 Adjust play speed: Use [ ] to increase play speed, use [ ] to decrease play speed. ( MAX: 4×)
 Pause/ Continue: Press [ENTER] to pause/continue playback. If played frame by frame,
press[ENTER]to play one frame;
Exit: [ESC];

Note: 1. When the DVR is busy working, if select high speed playback, the actual speed will has some
deviation.
2. When the DVR is recording, high speed playback may affect the recording.
Exit playback:
In playback interface, press [ESC] key to exit and enter preview mode.
In playback interface, press [MENU] key to enter main menu, press [REC] key to enter manual record,
and press[PTZ]key to enter into PTZ control mode.
User Manual of DS-8104HMI-A(/XX) Series Mobile Net DVR (V1.20.00)
28
Fig.4.7
Fig.4.8 Playback Image