Electrical - BOMBARDIER DS 7404 Operator's Manual

Release latches and remove air filter
box cover.
V02A0DY
1. Latches
2. Air filter box cover
Remove screw driver cap, push inside
of air box.
Loosen screw on clamp and remove
filter.
Remove foam.
3 1 2
V02A0EY
1. Clamp
2. Air filter and foam
3. Screw driver cap
66
1
2
Clean inside of air box.
Wash air filter and foam with warm
water and mild detergent as neces-
sary.
Squeeze foam to remove excess wa-
ter. Let dry air filter and foam thorough-
ly.
NOTE: Slight dust may be cleaned us-
ing a low-pressure airgun. Blow com-
pressed air backward of operating air
flow.
If air filter element or foam is dirty, re-
place with a new one.
Air Filter Installation
Properly reinstall removed parts in the
reverse order of their removal.

Electrical

Battery
Cleaning
Clean battery post with a wire brush.
Apply dielectric grease on post to pro-
tect against oxidation.
Removal
Disconnect negative BLACK cable first
then positive cable.
WARNING
Always respect this order for dis-
assembly; disconnect BLACK
negative cable first. Oil or fuel va-
pors can be present in engine
compartment and a spark may ig-
nite them and possibly cause per-
sonal injuries.