Tuner Setting; Setting Channels Automatically; Auto Channel Set - JVC HM-DH40000U Instructions Manual

Tuner Setting

Turn on the VCR and the TV, and select the AV
mode on the TV.
Set the VCR/TV/CABLE/DBS selector on the
Remote to "VCR".
VCR CABLE
TV /DBS
1 4

Setting channels automatically

— Auto Channel Set

Use Auto Channel Set only if channels have not been set
correctly by the Plug & Play setting. If you want to add
or delete channels, use Manual Channel Set (
1
2
3
2 3
4
INFORMATION
The VCR selects the correct band (TV or CATV)
automatically during Auto Channel Set.
The selected band will be displayed on the right side of
"BAND" on the Tuner Set Up screen.
Access Main Menu screen
Press MENU.
Access Tuner Set Up screen
1 Press @ # to move
the arrow to
"TUNER SET UP",
then press fi or
OK.
2 Press @ # to move
the arrow to
"TUNER SET",
then press fi or OK.
Perform Auto Channel Set
You can automatically
set the receivable
channels in your area
in the order of their
frequencies.
Press %fi to move the
arrow to "AUTO CH
SET", then press OK.
NOTES:
When Auto Channel
Set is complete,
"SCAN COMPLETED"
appears on screen.
If the scan was
unsuccessful, "SCAN
COMPLETED – NO SIGNAL FOUND –" appears on
screen. Check the connections, then select "RETRY"
to start again, or select "EXIT".
Return to normal screen
Press MENU.
13
EN
pg. 14).
FUNCTION SET UP TUNER SET UP INITIAL SET UP
TUNER SET CABLE SET UP DBS SET UP
BAND TV
AUTO CH SET
MANUAL CH SET
OK
MENU
SELECT WITH ARROW KEYS
THEN PRESS [OK]
SELECT
EXIT
FUNCTION SET UP TUNER SET UP INITIAL SET UP
TUNER SET CABLE SET UP DBS SET UP
BAND TV
AUTO CH SET
MANUAL CH SET
OK
MENU
SELECT WITH ARROW KEYS
THEN PRESS [OK]
SELECT
EXIT
FUNCTION SET UP TUNER SET UP INITIAL SET UP
TUNER SET CABLE SET UP DBS SET UP
AUTO CHANNEL SET
SCANNING...
PRESS [MENU] TO END
OK
MENU
SELECT WITH ARROW KEYS
THEN PRESS [OK]
SELECT
EXIT