Setting And Displaying Date/Time - JVC SR-HD1700US Instructions Manual

Setting and Displaying
Date/Time
Set the date/time of the built-in clock as follows. The
recording date/time is stored on the disc.
Setting the date/time
Set the date/time of the built-in clock as follows.
1 Press the [SET UP] button on the remote control unit
The Settings menu screen appears.
2 Select "SETUP", and press the [OK] button
3 Select "CLOCK SET/DISPLAY", and press the
[OK] button
"CLOCK SET/DISPLAY" menu screen appears.
4 Select "CLOCK SET", and press the [OK] button
The Clock Set menu screen appears.
5 Set the time and date
Repeat the steps below to specify the time and date.
① Press the [ J ] or [ K ] button, select the Clock Set
item, and press the [OK] button.
② Press the [ J ] or [ K ] button, change the setting
value, and press the [OK] button.
Preparation
23