JVC HM-DH40000U Instructions Manual page 58

58
EN
S-VHS MODE
ON
OFF
AV COMPU-LINK
ON
OFF
AV COMPU LINK
Television
To S-VIDEO IN
You can determine which recording mode — either S-VHS mode or VHS mode — is
used for recording on D-VHS and S-VHS tapes.
When this function is set to "ON", you can record on D-VHS and S-VHS tapes with
S-VHS picture quality.
When this function is set to "OFF", you can record on D-VHS and
S-VHS tapes with VHS picture quality.
NOTES:
To record in S-VHS/VHS mode on D-VHS tape, press D-VHS to turn off the D-VHS indicator.
S-VHS mode allows you to make high quality video recordings with horizontal resolution of 400
lines, comparing with the 230 lines of resolution of conventional VHS recordings. To achieve the
highest quality picture we recommend to record in S-VHS mode. (But remember that a
conventional VHS VCR without SQPB cannot play back S-VHS tapes recorded in S-VHS mode.)
S-VHS MODE setting does not affect recording on VHS tapes. Recording on VHS tapes is always
performed in VHS mode except when using S-VHS ET mode (
The REMOTE PAUSE/AV COMPULINK terminal on the rear panel can be used as either
the REMOTE PAUSE terminal or the AV COMPULINK terminal.
When this function is set to "ON", you can use this terminal as the AV COMPULINK
terminal.
By connecting other JVC's AV COMPULINK components (see the diagram below),
including amplifiers (or receivers) and televisions, one touch control of the audio and
video components linked via their AV COMPULINK connectors becomes possible.
For example: simply load a cassette in the VCR and press PLAY ( 3 ) so that the AV COMPULINK
components automatically turn on, the TV's AV mode is selected and the VCR starts playback. (You
do not have to press PLAY ( 3 ) if the cassette's record safety tab is removed.)
When this function is set to "OFF", you can use this terminal as the REMOTE PAUSE
terminal ( pg. 67).
NOTES:
When the remote control code is set to "C" or "D", the connector cannot be used as AV
COMPULINK terminal even if "AV COMPU-LINK" is set to "ON". It is recommended to set the
remote control code to "A" when you use this function. (
Connection varies depending on the type of JVC TV you have. Refer to the TV's instruction manual
when making this connection.
To AV COMPU
LINK II
(VCR ONLY)
To AUDIO IN
Mini-plug cable (not supplied)
Audio cable (supplied)
S-video cable (supplied)
OTHER USEFUL FUNCTIONS (cont.)
* The default setting is bold in the table below.
pg. 71).
This VCR
CABLE BOX
REMOTE PAUSE/
AV COMPULINK
To REMOTE
PAUSE/
AV COMPULINK
pg. 59).
VHF/UHF
COMPONENT
ANTENNA
VIDEO OUT
IN
Y P B /C B P R /C R
i.LINK IN/OUT
IN
OUT
DV IN
S VIDEO
S VIDEO IN(L-1)
ANTENNA
OUT
AUDIO VIDEO AUDIO VIDEO PCM/DOLBY DIGITAL
R L R L
D THEATER
REGION 1
IN(L-2)
To S VIDEO
OUT
To AUDIO
OUT
S400
DIGITAL OUT
OPTICAL