JVC HM-DH40000U Instructions Manual page 20

20
EN
VCR CABLE
TV /DBS
7
NOTES:
The Controller may not work with all types of DBS receiver.
If your DBS receiver does not respond to the code, you
cannot use the Controller to change satellite channels. In this
case, make sure to leave the DBS receiver turned on and
tuned to the proper channel before the scheduled start time of
timer recording. In addition, if your DBS receiver is equipped
with a timer, you can also use "Satellite Auto Recording"
( pg. 62).
The VCR can only change the satellite channel through the
Controller during timer recording.
If your DBS receiver cannot be operated with a Remote
(because it has no remote sensor), you cannot use the
Controller to change its channels. Make sure to leave the DBS
receiver turned on and tuned to the proper channel before the
scheduled start time of timer recording.
For customers in U.S.A.: If you are unable to set the
Controller, contact JVC toll free at 1-800-252-5722.
5
6
5 6
7
INITIAL SETTINGS (cont.)
Enter DBS Receiver's brand
Press %fi to move
the arrow to
"BRAND".
Press @ # to enter the
brand code from the
following list.
BRAND
JVC (DISH Network)
ECHOSTAR (DISH Network)
SONY (DSS)
RCA (DSS)
Engage test mode
Press %fi to move the arrow to "TEST MODE",
then press OK.
The program currently received through the DBS
receiver appears for about 10 seconds.
NOTE:
If you do not engage the test mode in step 6 , "INPUT
CH" and "BRAND" are not set.
If the DBS receiver's channel changes to 205,
setting is complete
Press @ # to move
the arrow to "YES",
then press OK and
"DBS RECEIVER
CONTROL IS ON"
appears on the
screen for about 5
seconds.
If the DBS receiver's channel does not change
as shown above
1 Press @ # to move the arrow to "NO".
2 Press OK.
3 Re-enter the correct code.
Return to normal screen
Press MENU.
FUNCTION SET UP TUNER SET UP INITIAL SET UP
DBS SET UP
INPUT CH
OFF
BRAND 40
TEST MODE
OK
MENU
SELECT WITH ARROW KEYS
THEN PRESS [OK]
EXIT SELECT
CODE
51
51
41
40
FUNCTION SET UP TUNER SET UP INITIAL SET UP
DBS SET UP
INPUT CH OFF
DID YOUR DBS RECEIVER CHANGE TO
CHANNEL 205?
YES NO
OK
MENU
SELECT WITH ARROW KEYS
THEN PRESS [OK]
SELECT
EXIT