Clock Setting; Preparations; Turn On The Vcr - JVC HM-DH40000U Instructions Manual

10
EN

Clock Setting

Turn on the VCR and the TV, and select the AV
mode on the TV.
Set the VCR/TV/CABLE/DBS selector on the
Remote to "VCR".
VCR CABLE
TV
/DBS
1 7
Perform clock setting only if the clock has not been set
correctly by the Plug & Play setting or if you use a cable
box.
Access the Clock Set screen to perform the Semiauto or
Manual Clock Set. Each procedure starts from step 3
after preparation steps below are finished.
If you use a cable box, set the clock manually. (

Preparations

1
2
2 – 6
INITIAL SETTINGS (cont.)
Access Main Menu screen
Press MENU.
Access Clock Set screen
1 Press @ # to move
the arrow to
"INITIAL SET
UP", then press fi
or OK.
2 Press @ # to move
the arrow to
"CLOCK SET",
then press fi or OK.
If "CABLE BOX USERS SET CLOCK
MANUALLY" appears on the screen, press OK
to access the Clock Set screen. (Even if you do
not press OK, the Clock Set screen disappears
after 5 seconds, then the Clock Set screen
appears automatically).
pg. 12)
FUNCTION SET UP TUNER SET UP INITIAL SET UP
CLOCK SET GUIDE CHANNEL OTHER
AUTO CLOCK SET
MANUAL CLOCK SET
AUTO CLOCK OFF
OK
MENU
SELECT WITH ARROW KEYS
THEN PRESS [OK]
SELECT
EXIT