JVC HM-DH40000U Instructions Manual page 30

30
EN
Other useful functions for recording
You can also use the following functions for recording.
Video Calibration (S-VHS/VHS only) (
When this function is set to "ON", this VCR checks the
condition of the tape in use during playback and
recording, and compensates to provide the highest-
possible pictures.
Second Audio Recording (
This VCR's built-in MTS decoder enables reception of
Multichannel TV Sound broadcast.
To record a SAP program received, set "2ND AUDIO REC"
to "ON" using the menu screen.
NOTES:
When the channel is changed on the VCR;
The "STEREO" indication appears on the screen for about
5 seconds if the program is a stereo broadcast.
The "SAP" indication appears on the screen for about 5
seconds if the program is a SAP broadcast.
The "SAP STEREO" indication appears when a stereo
program is accompanied by SAP sound.
S-VHS Recording Mode (
This VCR allows you to record on a D-VHS and S-VHS
tape with VHS picture quality.
S-VHS ET ( pg. 59)
This function allows you to record on VHS tapes with
S-VHS picture quality. Tapes recorded using this function
can be played back on a VCR equipped with the S-VHS ET
function.
pg. 54)
pg. 55)
pg. 58)
BASIC PLAYBACK AND RECORDING (cont.)
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its record safety tab.
To record on it later, cover the hole with adhesive tape.
Record safety tab