JVC HM-DH40000U Instructions Manual page 59

D-vhs digital recorder
Hide thumbs Also See for HM-DH40000U:
Table of Contents

Advertisement

S-VHS ET
This function allows you to record on VHS tapes with S-VHS picture quality. Tapes
recorded using this function can be played back on a VCR equipped with the S-VHS ET
ON
function. The S-VHS indicator lights up on the front display panel when "S-VHS ET" is set
OFF
to "ON".
NOTES:
DISPLAY
When this function is set to "OFF", only ":" appears on the front display panel.
ON
NOTE:
OFF
Even if you set "DISPLAY" to "OFF", each item appears on the front display panel in the following
cases;
Before recording, make sure that "V. CALIBRATION" is set to "ON" (
You cannot activate the S-VHS ET function...
– while recording is in progress.
– while timer-recording or Instant Timer Recording (
– while Video Calibration (
S-VHS ET does not work with S-VHS tapes.
To keep the highest quality recording and playback pictures over a long period of time, S-VHS recording
on S-VHS tapes is recommended.
Use of high grade tapes are recommended for S-VHS ET recordings.
On some tapes, picture quality will not improves even if the S-VHS ET function is used. Check the
recording quality before you start important recordings.
You can play back S-VHS ET recordings on most of S-VHS VCRs and of VHS VCR equipped with SQPB
(S-VHS QUASI PLAYBACK) function. (Notice some VCRs are not compatible with this function.)
While playing back a tape recorded with this function on some tapes, noise may appear. (If playback
picture becomes blurred or interrupted, use a cleaning cassette.)
During special effect playback (
frequently on a tape recorded with this function, the tape may be damaged and picture may be
deteriorated.
when the timer-recording is in progress/in the timer standby mode (
in the satellite Auto Recording standby mode (
during Plug & Play setting (
when you press REC ( ¶ ) twice for the ITR (
when you set the remote control code (
when you press DISPLAY, the current status appears for a few seconds.
* The default setting is bold in the table below.
pg. 28) is in progress.
pg. 54) is in progress.
pg. 31), noise may appear. If special effect playback is performed
pg. 62)
pg. 9)
pg. 28)
pg. 71)
EN
pg. 54).
pg. 34 – 41)
59

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents