Watching One Program While Recording Another; Showing On-Screen Display - JVC HM-DH40000U Instructions Manual

VCR
CABLE
TV
/DBS
D
Watching one program while
C
recording another
1
Engage TV mode
During recording...
Change the TV's input mode from AV to TV.
2
Select channel for viewing
Select the channel you want to watch, on the TV.

Showing on-screen display

D
When "SUPERIMPOSE" is set to "ON" (
can see the current VCR status on the TV screen.
For more detailed information about the on-screen
display, see page 85.
1
Display VCR status on TV screen
During recording or
recording pause, press
OSD on the Remote.
All indications
corresponding to the
current VCR status are
displayed for 5
seconds.
The time counter remains on the screen indicating
the elapsed time.
The indications are not recorded.
2
Exit on-screen display
Press OSD again.
NOTES:
The subtitles does not appear while the on-screen display is
displayed.
If the VCR is in recording pause mode, "
displayed.
The VCR status can be also displayed during playback.
Even if "SUPERIMPOSE" is set to "OFF" (
screen display appears when the VCR plays back the blank
portion of a tape and the VCR receives the channel which has
no broadcast. However, on-screen display does not appear
when the input location is selected and no signal is input.
29
EN
pg. 57), you
D-VHS HD CH 123
INDEX -9
D-VHS STD
L R 12:00 AM
B E SAP STEREO
¶8
" is always
pg. 57), the on-