Changing Remote Control Code - JVC HM-DH40000U Instructions Manual

Changing
Remote Control
Code
POWER
IN F-1
1
VCR CABLE
TV
/DBS
2
- 2
NOTE:
When "POWER SAVE" is set to "ON", you can not change the
remote control code. Before changing the code, set "POWER
SAVE" to "OFF" ( pg. 57).
The Remote is capable of controlling four JVC video
recorders independently. Each of VCRs can respond to
one of four codes (A, B, C or D).
This Remote control is preset to send A code signals
because your VCR is initially set to respond to A code
signals. You can easily change your Remote and the VCR
to send and respond to B, C or D code signals.
When using four JVC VCRs, set four VCRs and their
Remotes to different codes, so that the Remotes can
operate these VCRs separately.
1
PLAY (3)
2
+
3
5
2
4
- 1
5
To control four VCRs with the same Remote
2
You can control four JVC VCRs by switching the remote
- 3
control code for the Remote between A, B, C and D
( step 2), keeping four VCRs to different control
codes.
Press the Number key "1" for A code control signals,
"2" for B code control signals, "3" for C code control
signals, "4" for D code control signals. (To change only
the remote control code for the Remote, DO NOT
perform steps 3 to 5.)
(Ex.) To set Remote to B code:
Set remote operation mode
Set the VCR/TV/CABLE/DBS selector to "VCR".
Set remote control code for Remote
1 Press and hold A/B/C/D.
2 Press the Number key "1" for A code control
signals, "2" for B code control signals, "3" for
C code control signals, "4" for D code control
signals.
3 Press STOP ( 7 ), and release A/B/C/D.
Turn off VCR
Press POWER on the VCR.
Check remote control code for VCR
Press PLAY (3) on the VCR for more than 5
seconds.
The code currently set appears on the front
display panel.
Turn on VCR
Press POWER on the Remote.
The code transmitted from the Remote blinks
for a few seconds on the front display panel.
After the code disappears on the front display
panel, make sure that the VCR is turned on by
pressing POWER on the Remote.
A/B/C/D
ABC
Press in succession
Hold
down
71
EN
STOP
Release