Edit To Or From Another Recorder - JVC DR-M10S Instructions Manual

Edit To Or From
Another Recorder
A
TV receiver
Player
S-Video cable
AV mode
Recorder
B
TV receiver
Your unit
AV mode
Audio/video
cable
Player
Your unit
IN Y S-VIDEO L-1 L-2
VIDEO
S-VIDEO VIDEO
P B
LEFT
L-1
LEFT
PCM STREAM
OUT AV COMPU LINK
P R AUDIO AUDIO
L-2 DIGITAL OUT
RIGHT
RIGHT
ANTENNA COMPONENT OUTPUT INPUT CABLE BOX OPTICAL COAXIAL
Audio/video
cable
Another recorder
Recorder
IN Y S-VIDEO L-1 L-2
VIDEO
VIDEO
P B S-VIDEO
LEFT
L-1
LEFT
PCM STREAM
OUT AV COMPU LINK
P R AUDIO AUDIO
DIGITAL OUT
L-2
RIGHT
RIGHT
ANTENNA COMPONENT OUTPUT INPUT CABLE BOX OPTICAL COAXIAL
S-Video cable
Audio/video
cable
Another recorder
You can use your unit as the source player or as the
recording deck.
Slide the TV/CABLE/DBS/DVD switch to DVD.
A
Make connections.
A When using your unit as the source player ...
... connect its AUDIO/VIDEO or AUDIO/S-VIDEO
OUTPUT connectors to the audio/video or audio/S-video
input connectors on another recorder.
B When using your unit as the recording deck ...
1
... connect its AUDIO/VIDEO or AUDIO/S-VIDEO
INPUT connectors to the audio/video or audio/S-video
output connectors on another recorder.
If connecting a unit with an S-VIDEO input/output connector,
it is recommended to use an optional S-Video cable to
minimize picture degradation while editing.
B
Set the input mode of recording deck.
With this video unit, press CH +/– to select "L-1" or "L-2"
depending on the connectors being used.
When using S VIDEO connector, set "REAR AUX L-1" or
"REAR AUX L-2" to "S-VIDEO". (
When using VIDEO connector, set "REAR AUX L-1" or "REAR
AUX L-2" to "VIDEO". (
When using another recorder as the recording deck, refer to its
instruction manual.
C
Set the recording speed.
Press REC MODE repeatedly until the desired recording
1
speed appears.
D
Start the source player.
Engage the Play mode of the source player.
E
Start the recording deck.
Engage the Record mode of the recording deck.
F
Stop dubbing.
Stop recording on the recording deck, then stop playback
on the source player.
NOTES:
All necessary cables can be obtained from your dealer.
When you use this unit as the source player for editing, be sure
to set "SUPERIMPOSE" to "OFF" before starting. (
EN
pg. 98)
pg. 98)
pg. 99)
89