R
epair
[4] ADJUSTMENT
[4] -2. Adjustment
5
Adjustment for laser light
(1) Draw a line (right angle to Rip fence) on plywood.
Table insert
Draw a line.
Fig. 132
(3) If blade cannot be aligned with the line, adjust the following settings.
Adjustment for horizontal direction
Adjustment for inclined light
Plywood
Loosen M4x12 H.S.bolt.
Loosen M4x12 H.S.bolt.
M4x12 H.S.bolt
Fig. 134
Loosen two M4x10 H.S.bolts
Loosen two M4x10 H.S.bolts
and shift Laser base to adjust.
and shift Laser base to adjust.
M4x10 H.S.bolt
Laser base
Fig. 135
(2) Align blade with the line.
Blade
Fig. 133
Shift Laser moving fix plate
Shift Laser moving fix plate
horizontally to align laser light with
horizontally to align laser light with
the line.
the line.
Shift Laser moving fix plate
Shift Laser moving fix plate
horizontally to align laser light with
horizontally to align laser light with
the line.
the line.
P 35/ 45
Laser moving fix plate
Laser moving fix plate