R
epair
CAUTION: Repair the machine in accordance with "Instruction manual" or "Safety instructions".
[1] NECESSARY REPAIRING TOOLS
Code No.
Description
1R034
Bearing Setting Plate 12.2
1R036
Bearing Setting Plate 17.2
1R080
Arbor Press
1R173
Retaining Ring R Pliers
1R207
45-degree Set Square
1R208
90-degree Set Square
1R269
Bearing Extractor
1R291
Retaining Ring S and R Pliers
[2] LUBRICATION
Apply lubricant to the portions designated with the following arrows to protect parts and product from unusual abrasion.
Arrow
Type of lubricant
Makita grease SG No.0
Makita grease N No.1
Liquid gasket
Gear box section
Apply on whole surface.
press-fitting Bearing 6001 to Rotor
assembling Bearing 6004 to Output shaft
press-fitting Bearing
connecting/disconnecting Terminal connected to Carbon brush house
adjusting accuracy of 45 degrees
adjusting accuracy of 90 degrees
remove Bearing 6003
remove Retaining ring
Amount
approx. 10 g
a little
a little and flat
Gear box
Rotor
Fig. 1
Use for
After Gear box is attached,
apply grease while turning Gear.
P 2/ 45