Lower Blade Guard - Makita LS1017L Technical Information

R
epair
[3] DISASSEMBLY/ASSEMBLY

[3] -6. Lower blade guard

DISASSEMBLING
(1) Unscrew M6 Locknut and remove Lower blade guard.
ASSEMBLING
(1) Set Guard spring to Lower blade guard. And set Guard fix plate to Lower blade guard while engaging Guard spring to the hook
on Guard fix plate.
Hook of Guard fix plate
Guard spring Lower blade guard
(2) Set Bowl plate to Guard fix plate so as not to pinch Guard spring and secure Bowl plate with M6 Locknut.
And then, check that Guard fix plate works smoothly.
Lower blade guard
Guard fix plate
Bowl plate
Lower blade guard
Guard spring
M6 Locknut
Guard fix plate
Fig. 53
Guard fix plate
Fig. 54
One among the four
projections is large-sized,
so Bowl plate will only fit
in one direction.
M6 Locknut
Fig. 55
M6x12 Square neck bolt
Bowl plate
P 17/ 45