Makita LS1017L Technical Information page 28

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -9. Support arm (cont.)
DISASSEMBLING
(10) Remove Retaining ring 10 with 1R291.
1R291
Fig. 86
If 90° block spring is worn by the contact with
adjustment screw, replace it with a new one.
Support arm
90° block spring
Fig. 88
ASSEMBLING
(1) Assemble the following parts by reversing the
disassembly procedure.
90° block 90° block spring
Flat washer 12x20x1
Retaining ring 10
Fig. 89
Retaining ring 10
Note
90° block
Set 90° block spring
as shown above.
(11) Remove Flat washer 12x20x1, 90° block spring
and 90° block.
90° block
Flat washer 12x20x1
Fig. 87
(2) Attach 45° Limit bracket with three M6x20 H.S.bolts.
45° Limit bracket
Fig. 90
P 25/ 45
90° block spring
Support arm
M6x20 H.S.bolt