Working Table And Base - Makita LS1017L Technical Information

R
epair
[3] DISASSEMBLY/ASSEMBLY

[3] -10. Working table and Base

DISASSEMBLING
(1) Remove Sub fence and Right sub fence by loosening
three M10 Locknut.
Right sub fence
M10 Locknut
Fig. 101
(3) Loosen six M4x12 Cross head screws and remove
Table inserts.
Fig. 103
(5) Turn Base upside down and remove M10 Locknut
and Big flat washer 10.
Base
Fig. 105
Sub fence
M10 Locknut
Table insert
M4x12 Cross head screw
M10 Locknut
Big flat washer 10
(2) Remove four M8x30 Hex bolts and remove Rip fence.
Fig. 102
(4) Loosen M5x12 Cross head screw and remove
Miter pointer.
Miter pointer
Fig. 104
(6) Unlock Working table and remove it from Base.
Fig. 106
P 28/ 45
Rip fence
M8x30 Hex bolt
M5x12 Cross head screw
Working table