Automatic Relocation - Toshiba Strata DK14 System Administrator Manual

Always turn this feature off promptly after relocation is finished to
CAUTION!
avoid accidental relocation.

Automatic Relocation

This function enables you to physically move a telephone from one location to another
while maintaining all of the telephone's programmed features. Use the
Location Record"
To turn on the Auto Station Relocation feature
From the
Administrator station,
press a [DN] +

to turn on the
Auto Station
Relocation feature.
6SNU
1. Press .
To physically relocate (swap) Station A and B
Make sure that the location that the phone is moving to is already vacant.
Important!
If you are moving a telephone (for example, Station A) to a new location
that already has a telephone connected to it (for example, Station B),
disconnect Station B from its telephone jack before you disconnect Station
A.
You cannot configure the moving station (Station A) to an already occupied
station (Station B)
.
1. Verify that the
telephone jack for the
new location does not
have a telephone
connected.
Strata DK System Administrator's Guide 4/99
on 41 for telephone location tracking.
You hear a confirmation tone indicating the Station
Relocation feature is on. If you hear a busy tone, the
Station Relocation feature is already turned on, or you did
not dial from the Administrator station.
Setting System Parameters
Station Relocation
"Telephone
13