System Messages, Names And Memos - Toshiba Strata DK14 System Administrator Manual

To relocate (swap) Station A and B
1. From Station A, press
a [DN] +
111
( = [DN] of
Station B).
2. From Administrator
station, press a [DN]

+
Special Dial Station
Relocation, then
6SNU
press

System Messages, Names and Memos

You can write or edit station LCD messages, names or numbers.
To write LCD messages, names, or numbers
1. Access message/
memo/name displays.
2. Enter up to 32
alphanumeric
characters, (see
3 and the figure at the
right) using the
station keypad.
Strata DK System Administrator's Guide 4/99
You hear confirmation tone. Station A now has the
111
buttons and features of Station B and vice versa.
After Station Relocation is turned off, you hear a
confirmation tone. If you hear a busy tone, Station
to turn off Relocation was already turned off, or you did not dial
from the Administrator station.
. After the relocation is completed, exchange the
Note
keystrips of the two telephones, if they are
different, because a 10-button telephone
replaced with a 20-button type telephone,
retains the 10-button assignments.
When you select a message number, a cursor
(–) appears at the first character in the message.
Move Right
(Alpha mode only)
Table
Move Left
Setting System Parameters
System Messages, Names and Memos
Toggles between
alphanumeric
characters
Scrolls alpha/
special characters
2358
15