Speed Dial Pause And Flash Storage; Speed Dial Number Linking - Toshiba Strata DK14 System Administrator Manual

Setting System Parameters
Speed Dial—Advanced Features
3. XXX = Auto Park Orbit 9 9 9 (access the next available park orbit), or General Park Zones 900~919,
or [PDN] on which the call should be parked. Only use 999 with LCD telephones.
4. This feature will hold an existing call when the button is pressed. If the button is pressed when not on
a call, pickup or page will still be accessed. These codes can be used during a CO line call.
5. After pressing the feature button, the user dials the line number (01~99) to pickup the line.
6. After pressing the feature number, the user dials the line number (100~200) to pickup the line.

Speed Dial Pause and Flash Storage

Some Speed Dial numbers may require a pause (long or regular) or hookflash be included
(e.g., tone delay requires a pause at the beginning of a Speed Dial number).
Hookflash
The )ODVK button stores a
flash signal only if 6SG
'LDO 3DXVH is
programmed as a flexible
button on the telephone.
The flash signal is 0.5 or 2
seconds long (set in
system programming) and
is displayed on the LCD as
" ".
F-
Press )ODVK
...or enter the hookflash
dial code (&QI7UQ +
).

Speed Dial Number Linking

You can link any of the Station Speed Dial numbers to System Speed Dial codes or to any
of the optional buttons associated with these codes. The Administrator station can be used
to link System Speed Dial Codes. This enables lengthy digit strings to be stored under one
Station Speed Dial button or code.
The number directly stored in the System Speed Dial number dials out first, then the
number linked to it. Typically, a company's special carrier access telephone numbers are
stored as part of the digit string.
24
Regular Pause
The pause is either 1.5 or 3
seconds (set in system
programming). The LCD
displays " ".
P-
Press 6SG 'LDO 3DXVH
...or if 6SG 'LDO 3DXVH is
not on the telephone, press
)ODVK to store a pause.
Strata DK System Administrator's Guide 4/99
Long Pause
Ten-second pause, which
can be entered anywhere
in the Speed Dial number.
The LCD displays " ".
L-
Press 6SG 'LDO /QJ
3DXVH.