Automatic Relocation - Toshiba Strata CT System Administrator Manual

Setting System Parameters

Automatic Relocation

This function enables you to physically move a telephone from one location to another while
maintaining all of the telephone's programmed features. Use the
Page 37
➤
To turn on the Auto Station Relocation feature
1. From the Administrator
station, press a [DN] +
to turn on the Auto Station
Relocation feature.
2. Press
➤
To physically relocate (swap) Station A and B
H
Important!
C
1. Verify that the telephone jack
for the new location does not
have a telephone connected.
2. Unplug the telephone that is
moving from its wall jack at
the old location.
3. Plug the telephone that is
moving into the wall jack at its
new location.
4. From the Administrator
station, press [DN] +
to turn off Auto Station
Relocation, then press
Strata CT System Administrator Guide October 2000
for telephone location tracking.
#6282
Spkr
.
Make sure that the location that the phone is moving to is already vacant.
If you are moving a telephone (for example, Station A) to a new location that already
has a telephone connected to it (for example, Station B), disconnect Station B from its
telephone jack before you disconnect Station A.
You cannot configure the moving station (Station A) to an already occupied station
(Station B).
#6281
Spkr
You hear a confirmation tone indicating the Station
Relocation feature is on. If you hear a busy tone, the Station
Relocation feature is already turned on, or you did not dial
from the Administrator station.
The station is now moved to its new location while retaining
its original [DNs] and features.
You hear confirmation tone. If you hear a busy tone, the
Station Relocation feature was already turned off, or you did
not dial from the Administrator station.
.
Station Relocation
"Telephone Location Record" on
11