Toshiba Strata DK14 System Administrator Manual page 36

Setting System Parameters
Speed Dial—Advanced Features
0RGH
5. Press
6. Press [PDN], then
enter the desired CO
line access code, plus
the telephone number
(20 digits maximum).
5HGLDO
7. Press
8. Repeat Steps 1~7 to
enter more names/
memos.
To view and/or dial a Speed Dial number
0RGH
1. Press
3DJH
2. Press
the directory for the
appropriate number/
memo.
3. Press any available
/LQH
or [DN] + a CO
Line Access Code.
28
.
The number appears as you entered it. Speed Dial numbers
and memos and their corresponding two- or three-digit
codes can be recorded on the Speed Dial Memo Directory
at the back of this guide.
If telephones use direct appearing CO line buttons to
Note
place outgoing calls–do not press [PDN] in Step 6.
. The data is recorded into memory.

+ . The Speed Dial number appears
XXX
with a name or memo.
= Personal or System Speed
XXX
Dial Codes.
See Table 8, "Speed Dial Access
Codes," on page
It is recommended that you record Speed Dial
Note
numbers and memos and their corresponding
three-digit codes on the Speed Dial Memo Directory
at the back of this guide.
to scan
The number is dialed.
See "CO Line Access Codes" on
Page 33.
37.
Strata DK System Administrator's Guide 4/99
MODE NO.8XXX