Toshiba Strata DK14 System Administrator Manual page 13

If a caller enters the system via a DISA line or built-in Auto Attendant, the caller can then
access another line to place an outgoing call through the system, in which case the
outgoing line call is charged as a call made from the DK system. To prevent unauthorized
outgoing calls through the system using the DISA feature, enter a DISA security code as
shown in the following steps.
Whenever the built-in Auto Attendant is installed, the DISA
CAUTION!
security code should be used (and changed periodically) to prevent
unauthorized access of outgoing CO lines via the Auto Attendant
DISA access feature.
To enter or change the DISA security code
1. Press [DN] +
2. Dial the new DISA
security code (1~15
digits).
5HGLDO
3. Press
6SNU
4. Press .
To cancel the DISA security code
1. Press [DN] +
5HGLDO
2. Press
6SNU
3. Press .
Strata DK System Administrator's Guide 4/99

. You hear a confirmation tone.
The DISA security code digit
length is a system program option.
The code appears on the LCD as
you enter it.
. You hear a confirmation tone.
The telephone returns to the idle mode.

. You hear a confirmation tone.
. The telephone returns to the idle mode.
Setting System Parameters
Direct Inward System Access (DISA) Security Code
NO. NNN
____ ID CODE SET
NO. NNN
DATA PROGRAMMED
5