Speed Dial Memo - Toshiba Strata DK14 System Administrator Manual

the carrier access code (

Speed Dial Memo

This feature enables the Administrator station to program an 11- or 12-character name for
each of the system Speed Dial numbers. You can scroll through the memo pad of names to
select the appropriate party.
Notes
Before entering names for Speed Dial Numbers, turn off the Soft Key feature by
0RGH
pressing
feature back on by pressing the
For your convenience, use the Telephone Location Record on
dial numbers with memos from the Administrator station.
To program names and numbers
5HGLDO
1. Press
6SHHG 'LDO
2. Enter the Speed Dial
number.
0RGH
3. Press .
4. Enter up to 12
alphanumeric
characters, (see the
figure at the right)
using the station
keypad.
Strata DK System Administrator's Guide 4/99

) plus the telephone number (

+ when the telephone is idle. After entering the names, turn the
0RGH
, then The LCD displays:
.
The current name/memo and its code displays (see
"Speed Dial Access Codes," on page
The name/memo appears as you enter it.
Move Right
(Alpha mode only)
Move Left
Setting System Parameters
Speed Dial—Advanced Features


+ when the telephone is idle.
Scrolls alpha/
special characters
).
41 for recording speed
#* NNN SPEED DIAL
Table 8,
37).
2358
Toggles between
alphanumeric
characters
27