Receiving Fax Manually; Time Stamp; Deactivating Automatic Fax Printout; Polling Faxes - BELGACOM Belgafax 802 User Manual

Belgacom belgafax 802
Table of Contents

Advertisement

Memory Philips
The fax memory can store up to 400 pages. Follow the
specifications in the technical data.
Memory
If the message memory is full, no additional messages
can be received.
EN

Receiving Fax Manually

Receiving Fax Manually
Select manual reception under fax reception mode (see
Chapter Setting the Fax Reception Mode, page 28). The
device will not receive faxes on its own. This setting is use-
ful, when you want to receive faxes via a modem connected
to a computer. You can start fax reception manually, by
pressing o.

Time Stamp

Time Stamp
The device prints the date and the exact arrival time on
every incoming fax received. This allows you to document
the exact time at which you have received a fax transmis-
sion. A memory buffer in the device ensures that the cor-
rect date and time of reception will be maintained even af-
ter a power loss.
Switches Time Stamp On/Off
If the time stamp function is activated, incoming faxes will
be stored in the fax memory. As soon as the last page has
arrived, the arrival time is stored and the device prints out
all the pages. You can turn this function off (also see chap-
ter Switches Time Stamp On/Off, page 27).
Deactivating Automatic Fax
Printout

Deactivating Automatic Fax Printout

You can secure your fax reception with a code. In that case,
incoming faxes are not printed out, but rather are stored in
the fax memory. Only after entering a PIN code can you
print out these fax transmissions.

Entering the PIN Code

If you have already saved a code, the device will
ask you to provide the old code first before you
can enter a new code.
1 Press OK, 27 and OK.
2 Using [ select ANSWER CODE .
3 Confirm with OK.
4 Enter a four-digit PIN code.
Note down your PIN code in a safe place. Should
you forget the PIN code, the device must be reset
to factory settings, in order to be able to access it
again. All personal settings will be deleted.
5 Confirm with OK.

Switching On and Off

1 Press OK, 27 and OK.
2 Using [ select ACTIVATION .
3 Confirm with OK.
4 Enter the four-digit PIN code.
5 Confirm with OK.
14
6 Use [ to select whether you would like to turn the
function on or off.
7 Confirm with OK.
Printing Out Fax Transmissions
1 Press OK, 27 and OK.
2 Using [ select PRINT .
3 Confirm with OK.
4 Enter the four-digit PIN code.
5 Confirm with OK. The stored fax transmissions are
printed out and deleted from the memory.

Polling Faxes

Fax Polling
With the fax polling function, you can retrieve faxes that
lie ready in the dialled fax machine. You can also provide
documents on your machine to be polled by others.
Polling Faxes Directly
1 Press OK, 22 and OK.
2 Enter the desired number using the numeric keypad or
select a saved entry.
3 Press o.
Time-Deferred Polling
1 Press OK, 22 and OK.
2 Enter the desired number using the numeric keypad or
select a saved entry.
3 Confirm with OK.
4 Enter the time, at which the document should be
polled, e.g. 14 00 for 2 pm.
5 Confirm with OK.
6 The device is now in standby mode. You can continue
to carry on telephone conversations or send other fax
transmissions during this time.
Jobs
To cancel a scheduled fax transmission, simply delete
the document from the jobs list (also see chapter
Jobs, page 15).
Polling Send of Faxes
1 Insert the document.
2 Press OK, 23 and OK.
3 Using [ select SIMPLE or MULTIPLE . With the
setting SIMPLE , the document can be polled only
once. If you select MULTIPLE , the document can be
freely polled any number of times.
4 Confirm with OK.
5 Using [, select the desired contrast.
6 Confirm with OK. After a short warm up phase, the
device will store the document in the fax memory.
Jobs
To cancel a scheduled fax transmission, simply delete
the document from the jobs list (also see chapter
Jobs, page 15).
Belgacom Belgafax 802

Advertisement

Table of Contents
loading

Table of Contents