BASIC OPERATIONS ON VHS DECK
42
EN
Playback Features
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the TV/CABLE/SAT/DVD switch to DVD.
●
Press VHS/HDD/DVD SELECT on the unit repeatedly or VHS
on the remote so that the VHS lamp lights up on the unit.
HDD
VHS
2
3
8
AUDIO
ATTENTION:
In the search, still, slow-motion or frame-by-frame playback
mode,
●
the picture will be distorted.
●
the noise bars will appear.
●
there may be a loss of colour.
●
you cannot hear the sound.
Still Picture/Frame-By-Frame Playback
1
Press W to pause during playback.
●
If there is vertical jitter, press PR +/– to correct the picture.
2
Press W to activate frame-by-frame playback.
To resume normal playback, press I.
●
Slow Motion
1
Press W to pause during playback.
2
Press and hold W for 2 seconds, then release. Press W and
release again to return to still picture.
●
Press N for forward slow motion or O for reverse slow
motion.
To resume normal playback, press I.
●
NOTE:
During slow motion playback, some noise may appear on the TV
screen. Press PR +/– to eliminate the noises.
CABLE/SAT
TV
DVD
DVD
PR+/-
6
4
5
9
PROGRESSIVE
SCAN
Variable Speed Search
During playback, press N for forward variable speed search, or
O for reverse variable speed search.
●
Each press of the button increases the search speed for each
direction.
When pressing N:
(SP, LP): +5x Y +7x
When pressing O:
Once O is pressed, reverse search starts in –1x normal
playback speed. After this process, each press of O changes
the search speed between –5x and –7x in both SP mode and LP
mode.
(SP, LP): –1x N –5x Y –7x
●
To resume normal playback, press I.
One Touch Replay
During playback (or Live Memory Playback), press w. The unit
rewinds the picture a little (about 7 seconds) and resumes playback.
●
If the button is pressed repeatedly, the unit rewinds the pictures
continuously and resumes playback.
Skip Search
During playback, press v 1 to 6 times to skip over unwanted
sections.
●
Each press initiates an approximately 30-second period of fast-
motion playback. Normal playback resumes automatically.
To resume normal playback, press I.
●
Index Search
Your unit automatically marks index codes at the beginning of each
recording. This function gives you quick access to any one of the 9
index codes in either direction.
NOTE:
Before starting, make sure the unit is in the Stop mode.
Press S or T to activate Index Search. AS 1B or AT 1B is
displayed on the TV screen and search begins in the
corresponding direction.
●
To access index codes 2 through 9, press S or T repeatedly
until the correct index number is displayed.
Example:
To locate the beginning of B from the current position, press S
twice.
To locate the beginning of D from the current position, press T
once.
Current position
●
When the specified index code is located, playback begins
automatically.
Index number