JVC 1204MNH-SW-VE Instructions Manual page 85

Delete A Channel
1
Perform steps 1 – 5 of AManual Channel SetB (A pg. 84).
2
Press FGD E to select the channel you want to delete.
3
Press CANCEL(L) to delete a channel. The channel next to
the cancelled one moves up one line.
●
Repeat steps 2 – 3 as necessary.
4
Press SET UP or RETURN to close the Confirmation screen.
Change Station Channel Position
1
Perform steps 1 – 4 of AManual Channel SetB (A pg. 84).
2
Press D E to select AMOVEB, then press ENTER.
3
Press FGD E to select the channel you want to move, then
press ENTER.
4
Press FGD E to select the new channel position, then press
ENTER.
Example: If you moved the station in position 4 to position 2, the
stations originally in positions 2 and 3 each move down
one space.
INITIAL SET UP > MANUAL CH SET
PR PR
CH ID CH ID
01 C01 ---- 07 ----
02 02 CTEA 08 ----
03 05 1000 09 ----
04 3SAT 10 ----
C79
05 01 9LIV 11 ----
06 04 AB3 12 ----
< >
MOVE EDIT RETURN
●
Repeat steps 3 – 4 as necessary.
5
Press SET UP or RETURN to close the Confirmation screen.
When Receiving A Scrambled Broadcast (HDD & DVD
Deck Only)
1
Set AL-2 SELECTB to ADECODERB. (A pg. 72)
2
Perform steps 1 – 5 of AManual Channel SetB (A pg. 84).
3
Press FGD E to select the channel position broadcasting
scrambled programmes, then press ENTER. The Confirmation
screen appears.
4
Press F G to select ADECODERB, then press ENTER.
5
Press F G to set ADECODERB to AONB, then press ENTER.
6
Press RETURN to return to the Manual Channel Set screen.
●
Repeat steps 3 – 5 as necessary.
7
Press SET UP or RETURN to close the Confirmation screen.
INFORMATION
If you live in Eastern Europe, ATV SYSTEMB setting appears
instead of ADECODERB setting on the Manual Channel Set
screen. When you can see the picture but can hear no audio,
select appropriate TV system (D/K or B/G). Normally, TV
programmes are broadcast as follows.
For Eastern Europe : D/K
For Western Europe : B/G
A Select a country in Eastern Europe in step 5 of AAuto
Channel SetB (A pg. 83).
B Press F G to select ATV SYSTEMB in step 7 of AManual
Channel SetB (A pg. 84).
C Press F G to select appropriate TV System (D/K or B/G).
INITIAL SET UP > MANUAL CH SET
PR PR
CH ID CH
ID
01 C01 ---- 07 ----
02 C79 3SAT 08 ----
03 02 CTEA 09 ----
04 05 05 1000 10 ----
05 01 9LIV 11 ----
06 04 AB3
12 ----
< >
MOVE EDIT RETURN
Set Stations (A)
Set station names that are registered in your unit.
1
Perform steps 1 – 5 of AManual Channel SetB (A pg. 84).
2
Press FGD E to select the channel you want to modify, then
press ENTER. The Confirmation screen appears.
3
Press F G to select AIDB, then press ENTER.
4
Move the arrow to the left ID selection column. Registered
station names (ID) (A pg. 98) appear as you press F G.
5
Press ENTER to select the desired ID, then press ENTER
again to select AOKB.
6
Press RETURN to return to the Manual Channel Set screen.
●
Repeat steps 2 – 5 as necessary.
7
Press SET UP or RETURN to close the Confirmation screen.
Set Stations (B)
Set station names other than the ones registered in your unit.
1
Perform steps 1 – 5 of AManual Channel SetB (A pg. 84).
2
Press FGD E to select the channel you want to modify, then
press ENTER. The Confirmation screen appears.
3
Press F G to select AIDB, then press ENTER.
4
Press FGD E to select the desired characters (A–Z, 0–9, –, Z,
+, & (space)), then press ENTER.
●
Enter the remaining characters the same way (maximum of 4).
5
After entering all characters, press FGD E to select AOKB, then
press ENTER.
6
Press RETURN to return to the Manual Channel Set screen.
●
Repeat steps 2 – 5 as necessary.
7
Press SET UP or RETURN to close the Confirmation screen.
NOTE:
The characters available for the station name (ID) are A–Z, 0–9, –,
Z, +, & (space) (maximum of 4).
Fine-Tuning Channels Already Stored
1
Perform steps 1 – 5 of AManual Channel SetB (A pg. 84).
2
Press FGD E to select the channel you want to fine-tune, then
press ENTER. The Confirmation screen appears.
3
Press F G to select AFINEB, then press ENTER.
4
Press F G until the picture appears in its best quality, then
press ENTER.
●
Repeat steps 2 – 4 as necessary.
5
Press RETURN to return to the Manual Channel Set screen.
6
Press SET UP or RETURN to close the Confirmation screen.
SUBSIDIARY SETTINGS
EN
85