Table of Contents
Advertisement
BASIC OPERATIONS ON VHS DECK
44
EN
Basic Recording
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the TV/CABLE/SAT/DVD switch to DVD.
PR +/
VHS
7
8
REC MODE
1
Load a cassette with the record safety tab intact.
●
The unit's power comes on automatically and the counter is
reset to 0:00:00.
2
Press VHS/HDD/DVD SELECT on the unit repeatedly or VHS
on the remote so that the VHS lamp lights up on the unit.
3
Press PR +/– or the number keys to select the channel you
wish to record.
4
Press REC MODE repeatedly to set the recording mode.
5
Press R on the unit to start recording. Or while holding R, press
I on the remote control.
●
The VHS recording lamp lights up on the unit.
●
If AO.S.D.B is set to AAUTOB (A pg. 81), AMARKB blinks on the
screen while an index code is being marked.
B.E.S.T. takes place at the beginning of both the first SP and the
first LP recording after inserting the cassette. (A pg. 45)
6
Press W to pause recording.
●
You can select channel during the Record Pause mode.
●
To resume recording, press I.
7
Press o to stop recording.
●
The VHS recording lamp lights off on the unit.
VHS/HDD/DVD
SELECT
4 9
REC
8
7
MODE
CABLE/SAT
TV
DVD
0-9
PR+/-
4
9
Recording Features
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the TV/CABLE/SAT/DVD switch to DVD.
●
Press VHS/HDD/DVD SELECT on the unit repeatedly or VHS
on the remote so that the VHS lamp lights up on the unit.
TV AV/VIDEO
VHS
DISPLAY
AUDIO
Watch Another Programme While Recording On The Unit
While recording is going on, you can watch another programme on
the TV by using the TV's tuner.
NOTE:
It is required that the remote control is set to be able to operate the
TV in advance. (A pg. 74)
1
During recording, press TV AV/VIDEO to select TV mode.
●
Video mode is disengaged, and the VIDEO indicator on the
front display panel lights off.
VIDEO indicator lights off.
●
The programme received on the TV's tuner is displayed on the
TV screen.
2
Slide the TV/CABLE/SAT/DVD switch to TV.
3
Press PR +/– repeatedly to select the desired channel.
Elapsed Recording Time Indication
1
Press DISPLAY until a counter reading appears on the front
display panel.
2
Press CANCEL to reset the counter before starting recording or
playback.
●
The counter is reset to A0:00:00B and shows the exact elapsed
time as the tape runs. You can check the exact time of a
recording or playback.
VHS/HDD/DVD
7
SELECT
CABLE/SAT
TV
DVD
PR+/-
Advertisement
Table of Contents
