Table of Contents
Advertisement
Playback (VHS Deck)
The VHS deck cannot be operated.
●
The VHS deck is not selected.
N Press VHS/HDD/DVD SELECT on the unit repeatedly or VHS
on the remote so that the VHS lamp lights up on the unit.
The tape will not rewind or fast-forward.
●
The tape is already fully rewound or fast-forwarded.
N Check the cassette.
The playback picture does not appear while the tape is
running.
●
The TV is not set to the AV mode.
N Set the TV to the AV mode.
Noise appears during visual search.
●
This is normal.
Noise appears during normal playback.
●
The automatic tracking mode is engaged.
N Try manual tracking. (A pg. 43)
The playback picture is blurred or interrupted while TV
broadcasts are clear or AUSE CLEANING CASSETTEB
message appears on the screen.
●
The video heads may be dirty.
N Use a dry cleaning cassette TCL-2, or consult your JVC dealer.
Breaks are noticeable in Hi-Fi soundtrack.
●
The automatic tracking mode is engaged.
N Try manual tracking. (A pg. 43)
Recording (DVD Deck)
The desired programme cannot be recorded.
●
The channel position does not correspond to that in the
receiving area.
N Set the correct channel position for the receiving broadcast.
(A pg. 83)
Recording cannot be made.
●
No disc or a disc not being compatible with the unit is loaded.
N Load a recordable disc on the unit. (A pg. 5)
●
The disc loaded is not formatted.
N Format the disc. (A pg. 87)
●
A finalised DVD-R disc is loaded.
N Recording cannot be made on finalised discs. Load a
recordable disc on the unit.
●
The disc is full or does not have enough space for the title to be
recorded.
N Clear unnecessary titles on the disc or load a blank disc.
(A pg. 59)
●
The DVD-RAM disc loaded has had its protect tab slid to the
protect position.
N Release the protect tab. (A pg. 8)
Recording (HDD Deck)
TV broadcasts cannot be recorded.
●
AL-1B, AL-2B or AF-1B has been selected as the input mode.
N Set to the desired channel.
Camcorder recording is not possible.
●
The camcorder has not been properly connected.
N Confirm that the camcorder is properly connected.
●
The input mode is not correct.
N Set the input mode to AF-1B. (A pg. 70)
Recording (VHS Deck)
During recording, the tape does not run. The VHS recording
lamp lights up on the unit.
●
The unit is in the Record Pause mode.
N Press I to resume recording.
Recording cannot be done.
●
There is no cassette loaded, or the cassette loaded has had its
record safety tab removed.
N Insert a cassette, or using adhesive tape, cover the hole where
the tab was removed.
TV broadcasts cannot be recorded.
●
AL-1B, AL-2B or AF-1B has been selected as the input mode.
N Set to the desired channel.
Camcorder recording is not possible.
●
The camcorder has not been properly connected.
N Confirm that the camcorder is properly connected.
●
The input mode is not correct.
N Set the input mode to AF-1B.
The tape is automatically rewound, then the unit is shut off.
●
The end of the tape was reached during recording.
N The programme may not have been recorded in its entirety.
Next time make sure you have enough time on the tape to
record the entire programme.
Timer Recording (HDD & DVD Deck)
Timer programming cannot be made.
●
Date and time is not correct.
N Set date and time correctly. (A pg. 86)
●
Timer recording is in progress.
N Timer programming can't be performed while a timer recording
is in progress. Wait until it finishes.
Timer programming recording does not start.
●
Date and time is not correct.
N Set date and time correctly. (A pg. 86)
a
Timer Programming cannot be made.
●
Date and time set on the unit is not correct.
N Set date and time correctly. (A pg. 86)
●
The channel position does not correspond to that in the
receiving area.
N Set the correct channel position for the receiving broadcast.
(A pg. 83)
a
The
system does not timer-record properly.
●
The unit's channel positions have been set incorrectly.
N Refer to Ac System SetupB (A pg. 83) and reperform the
procedure.
TROUBLESHOOTING
91
EN
Advertisement
Table of Contents
