Playback Features - JVC HR-XVC33U Instructions Manual

Playback Features

● Turn on the TV and select the VCR channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
ATTENTION
In the search, still, slow-motion or frame-by-frame playback
mode,
● the picture will be distorted.
● the noise bars will appear.
● there may be a loss of colour.
● you cannot hear the sound.
Still Picture/Frame-By-Frame
Playback
1
Pause during playback.
Press PAUSE (9).
● If there is vertical jitter, press CH +/– on the Remote to correct
the picture.
2
Activate frame-by-frame playback.
Press PAUSE (9) to advance a still picture.
Slow Motion
1
Pause during playback.
Press PAUSE (9).
2
Activate slow motion playback.
Press and hold PAUSE (9) for 2 seconds, then release.
Press PAUSE (9) and release again to return to still
picture.
● The speed changes for each direction by pressing REW (3)
and FF (5) repeatedly.
NOTE:
During slow motion playback, some noise may appear on the TV
screen. Press CH + or – on the Remote to eliminate the noises.
High-Speed (Turbo) Search
During playback, press FF (5) for forward high-speed
search, or REW (3) for reverse high-speed search.
● The speed changes for each direction by pressing REW (3)
and FF (5) repeatedly.
When pressing FF (5):
(SP): +5x{+7x
(EP): +11x{+21x
When pressing REW (3):
Once REW (3) is pressed, reverse search starts in –1x
normal playback speed. After this process, each press of REW
(3) changes the search speed between –5x and –7x in SP
mode, –11x and –21x in EP mode.
(SP): –1x]–5x{–7x
(EP): –1x]–11x{–21x
To resume normal playback, press PLAY (4).
29
EN