Timer Recording On Vhs Deck; Timer Programming - JVC 1204MNH-SW-VE Instructions Manual

TIMER RECORDING ON VHS DECK

54
EN
b

Timer Programming

You can programme this unit to timer-record as many as 8
programmes.
a
With the system, timer programming is greatly simplified
because each TV programme has a corresponding code number
which your unit is able to recognise.
You can use the remote control to enter the
●
Make sure that the unit's built-in clock is set properly.
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the TV/CABLE/SAT/DVD switch to DVD.
VHS
CANCEL
ENTER
REC MODE
VHS#
1
Load a cassette with the record safety tab intact.
2
Press VHS so that the VHS lamp lights up on the unit.
3
Press PROGRAMME to access
the Programme screen.
4
Press F G to select
ASHOWVIEW PRGMB, then
press ENTER.
5
Press the number keys to enter
a
the number of a
programme you wish to record,
then press ENTER.
●
If you have made a mistake,
press CANCEL and input the
correct number before you press
ENTER.
●
If the number you entered is
invalid, AERRORB appears on the TV screen and AErrB appears
on the front display panel.
Press CANCEL and input a valid
6
a
The number you
entered and the matching timer-
recording information are
displayed on the TV screen.
Check the programme data.
●
To cancel this setting, press
PROGRAMME.
a
number.
CABLE/SAT
TV DVD
0-9
PROGRAMME
rtwe
PROGRAMME
NSHOWVIEW PRGM
PROGRAMME/CONFIRM
[JK] N [ENTER]
[PROGRAMME] : EXIT
[0-9] N [ENTER]
[L] : DELETE
[PROGRAMME] : EXIT
SHOWVIEW SYSTEM
a
number.
DATE START STOP
DAILY/WEEKLY TV PROG
MON-FRI
ARD
SP/LP VPS/PDC
SP OFF
CURSOR : [HI] SELECT : [JK]
CONFIRM : [ENTER]
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see Ac System SetupB (A pg. 83) and
set the Guide Programme number correctly.
7
Press REC MODE to select the desired recording mode. Or
press D E to select ASP/LPB, then press F G to select the
desired recording mode.
8
Press D E to select AVPS/PDCB, then press F G to select the
desired channel.
9
Press ENTER to complete timer programming.
●
To programme another timer, repeat steps 3 – 9.
●
If APROGRAM OVERLAPPEDB appears on the TV screen, see
page 56.
10
Press VHSj to engage the unit's timer mode. The VHS
recording lamp lights up on the unit and the HDD or DVD deck
is automatically selected. Press A to turn off the unit. When
the HDD or DVD deck is in timer standby mode, the unit is
automatically turned off.
●
The VHS timer indicator lights up on the front display panel
when the VHS deck is set to the timer recording standby
mode by pressing VHSj. However, it will blink rapidly when
VHSj is pressed under the following conditions:
● Clock is not set.
● Timer programming has not been set.
● Cassette is not loaded.
● Timer recording standby mode with a cassette without record safety
tab inserted
●
To disengage the timer mode, press VHSj again.
IMPORTANT:
If you have moved to a different area or if a broadcasting
station's programme number has been changed, the wrong
programme number will be displayed on the
programme screen in step 6. When this happens, set the correct
Guide Programme number for that station. (A pg. 83, Ac
System SetupB)
NOTES:
●
To Timer-Record Weekly Or Daily Serials:
^ in step 6, press number keys A9B for weekly serials or
number keys A8B for daily serials (Monday - Friday). Either
AWEEKLYB or ADAILYB appears on the TV screen. Pressing the
button again makes the corresponding indication disappear.
●
You can programme this unit to timer-record as many as 8
programmes. If you try to programme the unit to record a ninth,
APROGRAM FULLB appears on the TV screen and AFULLB
appears on the front display panel. To record the extra
programme, you must first cancel any unnecessary programmes.
(A pg. 56)
●
To record the programmes received by satellite receiver, record
on the HDD or the DVD discs. For details, refer to Ac Timer
ProgrammingB (A pg. 49)
a