Playback Features - JVC HR-XV48E Instructions Manual

Filename [XV48EX_EN_07S-VHS.fm]
XV48EX_EN_01.book Page 19 Saturday, October 9, 2004 10:34 PM

Playback Features

Turn on the TV and select the video channel (or AV
mode).
Slide the TV/VCR/DVD switch on the remote
control to the right.
ATTENTION
In the search, still, slow-motion or frame-by-frame playback
mode,
the picture will be distorted.
the noise bars will appear.
there may be a loss of colour.
you cannot hear the sound.
Still Picture/Frame-By-Frame
Playback
1
Pause during playback.
Press 9.
If there is vertical jitter, press PR +/– on the remote control to
correct the picture.
2
Activate frame-by-frame playback.
Press 9.
Slow Motion
While playback is paused, press and hold 9 for 2
seconds, then release. Press 9 and release again to return
to still picture.
NOTE:
During slow motion playback, some noise may appear on the TV
screen. Press PR + or – on the remote control to eliminate the
noises.
Variable Speed Search
During playback, press 5 for forward variable speed
search, or 3 for reverse variable speed search.
The speed changes for each direction by pressing 3 and
5 repeatedly.
When pressing 5: +5x{+7x
When pressing 3: –1x]–5x{–7x
(Once 3 is pressed, reverse search starts in –1x normal
playback speed. After this process, each press of 3 changes
the search speed between –5x and –7x.)
NOTE:
The search speed changes in the same way for SP and LP mode.
To resume normal playback, press 4.
Page 19
Skip Search
During playback, press 1 to 6 times to skip over
unwanted sections.
Each press initiates a 30-second period of fast-motion
playback. Normal playback resumes automatically.
To resume normal playback during a Skip Search,
press 4.
Index Search
Your unit automatically marks index codes at the beginning of
each recording. This function gives you quick access to any one
of 9 index codes in either direction.
NOTE:
Before starting, make sure the unit is in the Stop mode.
Activate Index Search.
Press or 6. "2 1" or "6 1" is displayed on
2
the TV screen and search begins in the corresponding
direction.
To access index codes 2
Current position
through 9, press 2 or
6 repeatedly until the
correct index number is
displayed.
Example:
To locate the beginning of B
from the current position,
press 2 twice.
To locate the beginning of D from the current position, press
6 once.
When the specified index code is located, playback begins
automatically.
Next Function Memory
The Next Function Memory "tells" the unit what to do after
rewinding. Before continuing, make sure the unit is in the Stop
mode.
a- For Automatic Start Of Playback
Press 3, then press 4 within 2 seconds.
b- For Automatic Power Off
Press 3, then press 1 within 2 seconds.
c- For Automatic Timer Standby
Press 3, then press # within 2 seconds.
d- For Automatic Cassette Ejection After Tape Rewind
Press 3, then press x within 2 seconds.
One Touch Replay
Press during playback.
Pressing once moves the playback position back to about 7
seconds before the current position. You can press
times each One Touch Replay.
Masterpage:Right-No-Heading
19
EN
Index number
up to 4
October 9, 2004 10:34 pm