Table of Contents
Advertisement
EDITING
72
EN
Output/Input Set
●
Turn on the TV and select the AV mode.
●
Slide the TV/CABLE/SAT/DVD switch to DVD.
ENTER
L-1 Output And L-1 Input Setting
The [L-1 IN/OUT] connector accepts and delivers either a composite
signal (regular video signal) or a Y/C signal (a signal in which the
luminance and chrominance signals are separated). Set AL-1
OUTPUTB and AL-1 INPUTB to the appropriate mode depending on
the type of appliance connected to the unit's [L-1 IN/OUT] connector.
1
Press SET UP to access the Main Menu screen.
2
Press D E to select AFUNCTION SET UPB, then press G.
3
Press D E to select AVIDEO
IN/OUTB, then press G.
4
Press F G to select AL-1
OUTPUTB or AL-1 INPUTB,
then press ENTER.
5
Press F G to select the
appropriate setting, then press
ENTER.
6
Press SET UP to complete the
setting.
\
* The boldface settings below indicate the settings at your purchase.
L-1 OUTPUT
SCART VIDEO
^
8
RGB / COMPONENT
SCART VIDEO
:
If a connected appliance's input is compatible only with regular
video signals, set to ASCART VIDEOB
SCART S-VIDEO:
If a connected appliance's input is compatible with Y/C signals,
set to ASCART S-VIDEOB. You can obtain high-quality picture.
(For connection, be sure to use a 21-pin SCART cable that is
compatible with the Y/C signal.)
CABLE/SAT
TV
DVD
rtwe
SET UP
DVD VIDEO SET UP
HDD/DVD SET UP
FUNCTION SET UP
INITIAL SET UP
REC/PLAY SET UP
VIDEO IN/OUT
DISPLAY SET
MONITOR TYPE
4:3LB
F-1 INPUT
VIDEO
L-1 OUTPUT
SCART VIDEO
L-1 INPUT
VIDEO
L-2 SELECT
VIDEO
SET UP
ENTER
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
EXIT
SELECT
DVD VIDEO SET UP
INITIAL SET UP
HDD/DVD SET UP
FUNCTION SET UP
REC/PLAY SET UP
DISPLAY SET
VIDEO IN/OUT
MONITOR TYPE
4:3LB
F-1 INPUT
VIDEO
L-1 OUTPUT
SCART VIDEO
SCART VIDEO
SCART S-VIDEO
L-1 INPUT
VIDEO
SCART RGB
COMPONENT
L-2 SELECT
VIDEO
ENTER
SELECT WITH @ THEN PRESS [ENTER]
SET UP
PRESS [SET UP] TO EXIT
EXIT
SELECT
/ SCART S-VIDEO / SCART
.
SCART RGB:
If a connected appliance's input is compatible with RGB
signals, set to ASCART RGBB. You can obtain a high-quality
RGB picture.
COMPONENT:
If a connected appliance's input is compatible with Y/P
signals, set to ACOMPONENTB. You can obtain a high-quality
Y/P
/P
picture. Switch the TV to the input that you can watch
B
R
component video pictures.
L-1 INPUT
VIDEO
^
/
8
VIDEO
:
If a connected appliance's output is compatible only with
regular video signals, set to AVIDEOB.
S-VIDEO
:
If a connected appliance's output is compatible with Y/C
signals, set to AS-VIDEOB. You can obtain a high-quality picture.
(For connection, be sure to use a 21-pin SCART cable that is
compatible with the Y/C signal.)
NOTES:
●
If AL-1 OUTPUTB is set to ASCART S-VIDEOB or ASCART RGBB, it
is not possible to set AL-1 INPUTB to AS-VIDEOB.
●
If AL-2 SELECTB is set to ASAT S-VIDEOB or ADECODERB, it is
not possible to set AL-1 INPUTB to AS-VIDEOB.
●
If AL-2 SELECTB is set to ADECODERB, it is only possible to set
AL-1 OUTPUTB to ASCART VIDEOB
●
Component video signals are not output from the [L-1 IN/OUT]
connector.
●
When Progressive scan mode is engaged, it is not possible to
select the setting of AL-1 OUTPUTB. (A pg. 72)
L-2 Select Setting
Set AL-2 SELECTB to the appropriate mode depending on the type
of appliance connected to the unit's [L-2 IN/DECODER] connector.
1
Perform steps 1 and 2 of AL-1 Output And L-1 Input SettingB on
the left column.
2
Press F G to select AL-2 SELECTB, then press ENTER.
3
Press F G to select the
appropriate setting, then press
ENTER.
4
Press SET UP to complete the
setting.
* The boldface settings below indicate the settings at your purchase.
L-2 SELECT
VIDEO
^
8
DECODER
Select AVIDEOB or AS-VIDEOB to use this unit as the recording deck
with the player connected to the [L-2 IN/DECODER] connector, or
to use the satellite receiver connected to the [L-2 IN/DECODER]
connector.
VIDEO
:
If a connected appliance's output is compatible only with
regular video signals, set to AVIDEOB.
S-VIDEO
:
If a connected appliance's output is compatible with Y/C
signals, set to AS-VIDEOB. You can obtain high-quality picture.
(For connection, be sure to use a 21-pin SCART cable that is
compatible with the Y/C signal.)
Select ASAT VIDEOB or ASAT S-VIDEOB to view a satellite
programme with the TV set while the unit is turned off. (A pg. 76)
SAT VIDEO
:
If a connected satellite receiver's output is compatible only with
regular video signals, set to ASAT VIDEOB.
S-VIDEO
.
DVD VIDEO SET UP
HDD/DVD SET UP
FUNCTION SET UP
REC/PLAY SET UP
DISPLAY SET
VIDEO IN/OUT
MONITOR TYPE
F-1 INPUT
L-1 OUTPUT
L-1 INPUT
L-2 SELECT
ENTER
SET UP
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
EXIT
SELECT
S-VIDEO
SAT VIDEO
SAT S-VIDEO
/
/
/
/P
B
R
INITIAL SET UP
4:3LB
VIDEO
VIDEO
SCART VIDEO
VIDEO
S-VIDEO
VIDEO
SAT VIDEO
SAT S-VIDEO
DECODER
/
Advertisement
Table of Contents
