Compak F10 Master Conic OD Instruction Manual page 15

Hide thumbs Also See for F10 Master Conic OD:
Table of Contents

Advertisement

9.3. Automatic mode
In this mode, user should press/release the dosis button (
and twice for a double dosis. The display screen (
either a single or double dose, along with the programmed time of the dose counting
down from total dose time to zero.
Also, once the dose cycle has been activated, the dosis button (
released, to suspend the cycle. If the dose pulse button is pressed/released again,
within 8 seconds, the cycle will continue from the point at which it was suspended. If
more than 8 seconds pass, the dose cycle will start a new, complete dose cycle.
9.4. Preselect mode
In this mode, a single or double dose setting is selected using the configuration
buttons (
). The preselection of a single or double dose will remain active until
changed by selecting another dose option. The preselection will be illustrated on the
display screen with the corresponding single or double icon (
The preselected dose is activated with a single press/tap of the dosis button (
display screen (
along with the programmed time of the dose counting down from total dose time to
zero.
Also, once the dose cycle has been activated, the dosis button (
released, to suspend the cycle. If the dose pulse button is pressed/released again,
within 8 seconds, the cycle will continue from the point at which it was suspended. If
more than 8 seconds pass, the dose cycle will start a new, complete dose cycle.
9.5. Refill button
If you press and hold down on the refill button (
with the desired amount of ground coffee.
14
) will indicate an icon representing either a single or double dose,
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 14/04/2014 | K06315
) once for a single dosis
) will indicate an icon representing
) can be pressed/
).
) can be pressed/
), you can manually refill the porta
). The

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the F10 Master Conic OD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

F8 od

Table of Contents