Remote Control Shooting; Exposure Bracketing - Pentax QS-1 Operation Manual

Remote Control Shooting

1
Press D in standby mode.
The Drive Mode screen appears.
2
Use CD to select Q and
press B.
3
Use CD to select Q, R or S and press E.
The camera returns to standby mode.
The self-timer lamp blinks.
4
Press the shutter release button halfway.
5
Point the remote control unit towards the remote
control receiver on the front or back of the camera,
and press the shutter release button on the remote
control unit.
tMemo
• The maximum operating distance of the remote control unit
is approx. 4 m from the front of the camera and approx.
5 cm from the back of the camera.
• To use the remote control unit to adjust the focus,
set in [9. AF with Remote Control] of the E2 menu.
• When using the Remote Control Waterproof O-RC1,
the autofocus system can be operated with the q button.
The r button cannot be used.
1
2
Remote Control Remote Control
3
4
Cancel Cancel OK OK
MENU OK
5
tMemo
• You can set the bracketing order in [5. Bracketing Order]

Exposure Bracketing

Press D in standby mode.
The Drive Mode screen appears.
Use CD to select T and press B.
Use CD to select T or U and press B.
Set the bracket value.
The bracket value can be set in
increments of 1/3 EV.
Available operations
Changes the bracket value.
V
Adjusts the exposure compensation
JV
value.
Resets the adjustment value
M
to the default setting.
Press E.
The camera returns to standby mode.
of the E1 menu.
3
Exposure Bracketing Exposure Bracketing
+0.3EV +0.3EV
Cancel Cancel OK OK
MENU
OK
45