Shooting With A Remote Control Unit (Optional) - Pentax KC-01 Operating Manual

104

Shooting with a Remote Control Unit (Optional)

The shutter can be released from a distance by using an optional remote
control unit (p.242).
Remote Control
h
Remote Control
i
(3 sec. delay)
Shooting with a remote control unit is not available in the following situations.
- when p mode, or \ (Moving Object)/Z (Pet)/R (Kids) of H mode is set
4
- when Interval Shooting is set
1
Mount the camera onto a tripod.
2
Press the four-way controller (5) in standby mode.
The Drive Mode setting screen appears.
3
Use the four-way controller (45) to select h.
4
Press the four-way controller
(3), use the four-way controller
(45) to select h or i, and press
the 4 button.
The remote control receiver on the front
of the camera will blink and the camera is
in a standby status.
5
Press the shutter release button halfway.
The autofocus system operates.
The shutter is released immediately after the shutter
release button on the remote control unit is pressed.
The shutter is released about 3 seconds after the
shutter release button on the remote control unit is
pressed.
Remote Control Remote Control
Cancel Cancel
MENU
OK OK
OK