Self-Timer Shooting; Remote Control Shooting - Pentax Q7 Operating Manual

Self-timer Shooting

1
Press D in standby mode.
The Drive Mode screen appears.
2
Use CD to select O and
press B.
3
3
Use CD to select O or P and press E.
The camera returns to standby mode.
4
Press the shutter release button halfway  fully.
The self-timer lamp blinks.
The shutter will be released about 12 seconds or 2
seconds.
40
1
2
Self-timer (12 sec.) Self-timer (12 sec.)
Cancel Cancel OK OK
MENU OK
3
4
5
tMemo
• The maximum operating distance of the remote control unit is
• To use the remote control unit to adjust the focus, set in [9.
• When using the Remote Control Waterproof O-RC1, the

Remote Control Shooting

Press D in standby mode.
The Drive Mode screen appears.
Use CD to select Q and
press B.
Use CD to select Q, R or S and press E.
The camera returns to standby mode.
The self-timer lamp blinks.
Press the shutter release button halfway.
Point the remote control unit towards the remote
control receiver on the front or back of the
camera, and press the shutter release button on
the remote control unit.
approx. 4 m from the front of the camera and approx. 5 cm
from the back of the camera.
AF with Remote Control] of the E2 menu.
autofocus system can be operated with the q button. The r
button cannot be used.
Remote Control Remote Control
Cancel Cancel OK OK
MENU OK