Advertisement
Connecting the Camera to an AV Device
You can connect the camera to a TV or other device with a video
input terminal or HDMI input terminal and play back images.
Have a cable according to the terminal of the device to which
you connect.
Terminal of AV Device
Video terminal
HDMI terminal
4
1
Turn the AV device and camera off.
2
Open the terminal cover of the camera, and connect
the cable to either the PC/AV terminal or HDMI
terminal.
3
Connect the other end of the cable to the input
terminal on the AV device.
4
Turn the AV device and camera on.
The camera turns on in video mode or HDMI mode,
and the camera information is displayed on the screen
of the connected AV device.
60
Cable Used
AV cable I-AVC7 (optional)
HDMI cable with an HDMI terminal
(Type D) (commercially available)
uCaution
• When using the video output, images are output at normal
resolution regardless of the resolution supported by the AV
device. To output HD video, use the HDMI output or transfer
to and play back on a computer.
• While the camera is connected to an AV device, nothing is
displayed on the camera monitor. Also, you cannot adjust the
volume on the camera. Adjust the volume on the AV device.
• You cannot output both composite and HDMI video signals
at the same time.
tMemo
• Check the operating manual of the AV device and select
a suitable input terminal for connecting the camera.
• If you intend to use the camera continuously for a long period,
use of the AC adapter kit (optional) is recommended.
• When the hometown is set at the time of initial setting (p.28),
the video output format is also set in accordance with that
region. When you set [Time Setting] to [Destination] in [World
Time] of the D1 menu, the video output setting changes to
the video output format for that city. Depending on the country
or region, images may fail to be played back with the set video
output format. If this happens, change the setting in [Video
Out] of [Interface Options] in the D2 menu. Refer to "List of
World Time Cities" (p.91) for video output format for cities that
can be selected as a hometown or destination.
• By default, the maximum resolution supported by both the AV
device and camera is automatically selected. If it fails to play
back images properly, change the setting in [HDMI Out] of
[Interface Options] in the D2 menu.
Advertisement
