Selecting The Folder/File Number Settings - Pentax QS-1 Operation Manual

Selecting the Folder/File Number Settings

Folder
When images are captured with this camera, a folder is
automatically created and the captured images are stored in it.
Each folder name consists of a sequential number from 100
to 999 and a string of 5 characters. You can change the folder
name in [Folder Name] of the D2 menu.
The two digits of the month and day on which
the picture was taken are assigned after the folder
number. The month and day appear according
5
Date
to the date format set in [Date Adjustment].
Example) 101_0125: for images taken
on January 25th
The character string "PENTX" is assigned after
PENTX the folder number.
Example) 101PENTX
A folder with a new number is created when the folder name
is changed.
tMemo
• A maximum of 500 images (100 images for Eye-Fi card) can
be stored in a single folder. When the number of captured
images exceeds 500, a new folder is created with the number
following the number of the folder currently being used.
In Exposure Bracketing shooting, images will be stored
in the same folder until shooting is completed.
• When [Create New Folder] is selected in the D2 menu,
a folder is created with the number following the number
of the folder currently being used. Only one folder can be
74
created using this feature. Multiple empty folders cannot be
D2
created consecutively.
• When [Develop multiple images] or [Develop images in
folder] of [RAW Development] is performed, a "xxxR_JPG"
folder with a new number is created, and the JPEG images
are stored in it. (p.67)
uCaution
• The maximum folder number is 999. After the folder number
reaches 999, you cannot capture new images if you attempt
to change the folder name or create a new folder, or when
the file name number reaches 9999.
File No.
Each file name consists of a string of
4 characters and a sequential
number from 0001 to 9999. You can
set whether to continue the
sequential numbering for the file
name even if a new folder is created
in [Sequential Numbering] of [File
No.] in the D2 menu.
Continues the sequential numbering for the file name
T
even if a new folder is created.
Returns the file number of the first image saved
S
to a folder to 0001 each time a new folder is created.
Select [Reset File Number] to reset the file number to its default
setting.
File No. File No.
Sequential Numbering Sequential Numbering
Reset File Number Reset File Number
Uses sequential file number Uses sequential file number
in new folder based on last in new folder based on last
number in previous folder number in previous folder
MENU