Table of Contents
Advertisement
Chapter 1: Connections and Setup
Software
*Windows is a trademark of Microsoft Corporation.
**Macintosh and the Mac OS are trademarks of Apple Computer, Inc.
Wall Mounting
The number of the screw: 2 pcs
Direction for wall mounting: LED panel upward.
Dimension for the screw: TBD
There are 4 slots on the underside of the EMTA that can be used for wall mounting.
Note: When wall mounting the unit, ensure that it is within reach of the power outlet.
You will need 2 suitable screws which screw diameter would be 4.4 mm to wall mount the Cable
Modem or the Battery Pack. Two different wall mount directions could be chosen for the Battery
Pack.
To do this:
1.
Ensure that the wall you use is smooth, flat, dry and sturdy and use the 4 screw holes
which are 101.6 mm apart from each other.
2.
Fix the screws into wall, leaving their heads 3 mm (0.12 inch) clear of the wall surface.
4
A TCP/IP network protocol for each machine
•
Microsoft Internet Explorer 4.0 or later or Netscape Navigator 4.0 or
•
later. (5.0 and 4.7 or later, respectively, are strongly
recommended.)
Advertisement
Table of Contents
